The requirements of the length of the electric kart movement, the total width of parallel road roads, and the total width of the turning width:

1. The length of the sports field, the total width of parallel road roads, and the total width of the turning of the sports field must meet the regulations.

2. The length of the sports field, the total width of parallel road roads, and the total width of the turns are required.

Requirements for the length of parallel line roads:

1. The starting line and finish line of the sports field are built in the middle of the parallel road road. The length of the parallel road of the sports field should meet the requirements.

2. The length of the parallel road is required to be rice.

The stipulated raw material materials of the electric kart sports venue: The raw material of the sports venue of the outdoor kart park should be the same asphalt concrete. The kart in the room can also be built by mixed dirt or other hard raw materials.

Electric kart sports venues should meet the quality regulations below:

1. Dean degree: The surface density is not less than 94%(nuclear meter measurement)

2. Plane degree: Liqing gravel ground overall surface layer plane (gap) does not exceed 5 mm; Liqing penetrates into the plane of the overall floor layer of the ground, no more than 10 mm; concrete concrete pavements Layer plane degree (gap) does not exceed 5 mm.

3. Floor anti -slip characteristics: The ground friction resistance of the newly paved ground is not less than 0.65, and the friction resistance after one year of application is not less than 0.43 (accurate measurement of the instrument)